HJM ACP9000 Instrucciones De Uso página 60

Inglés_Maquetación 1 25/11/15 09:55 Página 60
DISASSEMBLY AND ASSEMBLY OF BATTERIES FOR
REMOTE CONTROLLER
1. Press the mark "
remote controller with fingers as shown in the fig, and then remo-
ve the batteries box cover along
the arrow direction.
2. Replace with two #7 (AAA 1.5V)
dry batteries. Make sure positions
for "+" pole and "-" pole are
correct.
3. Reinstall batteries box cover.
Note:
- During operation, point the signal
sender at the signal receiving win-
dow on indoor unit.
- Distance between signal sender and receiving window can't exce-
ed 8m and there should no obstacles between them.
- As for the room with fluorescence lamp or wireless telephone, sig-
nal can be interfered easily. Try you best to put you remote contro-
ller close to indoor unit.
- When replacing batteries, do use two new same mode batteries.
- If you won't use your remote controller for a long time, take out the
batteries.
- If display on remote controller is light or no display, please replace
batteries.
OPERATION OF REMOTE CONTROLLER BOX
Press the position marked with "
with fingers as shown in the fig, and the remote controller box cover
will bounce automatically. Put the remote controller into it and then
reinstall the remote controller box cover.
" on back cover of batteries box cover for
" on remote controller box cover
- 60 -
E
N
G
L
I
S
H