Milwaukee 2311-20 Manual Del Operador página 8

Cámara multimedia inalámbrica m12 av m-spector
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

accessories
Warning
pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.
For a complete listing of accessories refer to your
MILWAUKEE Electric Tool catalog or go online
to www.milwaukeetool.com. To obtain a catalog,
contact your local distributor or a service center
listed on the back cover of this operator's manual.
M-Spector AV Replacement Digital Camera
Cable (17 mm) Cat. No. 48-53-0125
M-Spector AV Replacement Analog Camera
Cable (9.5 mm) Cat. No. 48-53-0130
M-Spector AV 8-Foot Extension
Cat. No. 48-53-0140
M-Spector AV 3-Foot Extension
Cat. No. 48-53-0141
The M-Spector AV Digital Camera Cable (17 mm)
can be extended up to 19 feet.
The M-Spector AV Analog Camera Cable (9.5 mm)
can be extended up to 30 feet.
Always remove battery
mainTenance
Warning
always unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disas-
semble the tool, battery pack or charger.
Contact a milWaukee service facility for
ALL repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
After six months to one year, depending on use,
return the tool, battery pack and charger to a
MILWAUKEE service facility for:
• Lubrication
• Mechanical inspection and cleaning (gears,
spindles, bearings, housing, etc.)
• Electrical inspection (battery pack, charger,
motor)
• Testing to assure proper mechanical and
electrical operation
If the tool does not start or operate at full power
with a fully charged battery pack, clean the contacts
on the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a MILWAUKEE service facility for repairs.
Warning
sonal injury and damage, never immerse your
tool, battery pack or charger in liquid or allow
a liquid to flow inside them.
Cleaning
Clean dust and debris from charger and tool
vents. Keep tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp cloth
to clean the tool, battery pack and charger since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia.
Never use flammable or combustible solvents
around tools.
Repairs
For repairs, return the tool, battery pack and char-
ger to the nearest service center listed on the back
cover of this operator's manual.
8
To reduce the risk of injury,
To reduce the risk of per-

Publicidad

Tabla de contenido
loading

Tabla de contenido