Amica PG4VQ247CF Manual De Instrucciones página 42

OPERATION
Automatic warm-up function
Each cooking zone is equipped with an auto-
matic warm-up function. When this is activa-
ted, then the given cooking zone is switched
on at full power for a time dpending on the heat
setting selected, and is then switched back to
the heat setting set.
Activate the automatic warm-up function by
setting the required heating power by touching
the (+) sensor (5) first. Then the heating level
„9" is displayed intermittently on the cooking
zone indicator (3) with the letter "A" for around
10 seconds.
If you start to set the heating power level within
10 seconds by touching the (-) sensor field
(4), then the automatic warm-up function is
activated and the letter „A" remains lit for as
long as it stays activated.
The cooking heating power level can be now
changed at any moment using the method
described above in the „setting the heating
power" section.
If you do not start to set the heating power setting within 10 seconds, then the
letter „A" vanishes and the automatic warm-up function is inactive.
If you do not wish the automatic warm-up function to operate, start selecting
the heating power by touching the „-" sensor (4) (the letter „A" is not lit).
Switching off selected cooking zone
Selected cooking zone may be switched off
in the following way:
1. Select the required cooking zone using the
cooking zone selection sensor field (2).
2. Then simultaneously press the (+) sensor
(5) and the (-) sensor (4), or use the (-)
sensor (4) to lower the setting to „0".
The letter „H" appears on the indicator sym-
bolising residual heat.
Cooking heating
power setting
1
2
3
4
5
6
7
8
9
2
42
3
5
3
5
Fast cooking time
(min)
1
3
4,8
6,5
8,5
2,5
3,5
4,5
-
3
4 5