Hkoenig MXK30 Manual De Utilización página 4

- This device is not intended for use by persons with
reduced capacity on the physical, mental or sensory or
lack of experience and knowledge (including children),
unless he has them was asked to monitor or if they have
had instructions on the use of the appliance by a person
responsible
supervised to ensure they do not play with the device.
- If the power cord is damaged, it must be replaced with an
after-sales service to avoid any danger.
DESCRIPTION OF PARTS:
1. Measuring Cup
2. Lid
3. Glass Jar
4. Rubber seal
5. Blade assembly
6. Jar base
7. Motor housing
8. Power cord and plug
9. Anti-slip rubber base feet
10. Speed selector switch
11. Speed adjustment panel
12. Function buttons
13. Upper base of housing
ASSEMBLY AND USE
1. Make sure the unit is switched off and do not plug in before assembling.
2. Then fix the glass jar on to the motor base and make sure it is securely fixed to the base.
3. Fill the glass jar with the food you wish to blend and make sure the jar does not overflow
maximum capacity of liquid should not exceed 1500 ml.
4. Never use the unit without putting food in the jar.
5. Place the lid securely on the glass jar.
6. Insert the measuring cup in the opening of the lid and turn counter-clockwise to lock it in position.
HOW TO OPERATE THE BLENDER
Before using the blender, you must clean the glass jar with hot water as follows:
1.
a) Turn the speed selector switch to position "OFF" in order to make sure the unit is turned off.
b) Remove the lid with measuring cup
c) Fill 700-1000ML hot water into the glass jar and then switch on the appliance for about 20 seconds, switch off
the and then empty the glass jar before unplug the unit.
d) Clean the measuring cup and lid with a soft damp cloth.
2. Make sure the speed selector switch is turned to the "OFF" position and then plug the blender into mains supply.
for their safety. Children should be
with liquid. The