Specifications; Fg3C - Wavetek Meterman FG2C Manual De Instrucciones

in U.S.A.
Wavetek Meterman
1420 75th Street SW
Everett, WA 98203
Tel: (877) 596-2680
Fax: (425) 446-6390

SPECIFICATIONS

1.Main
Frequency Range
Amplitude
Impedance
Attenuator
DC Offset
Duty Cycle Control
LED Display
Range Accuracy
2.Sine Wave
Distortion
Flatness
3.Triangle Wave
Linear
4.Square Wave
Symmetry
Rise or Fall Time
5.CMOS Output
Level
Rise or Fall Time
6.TTL Output
Level
Fan Out
Rise or Fall Time
7.VCF
Input voltage
Input Impedance
8.GCV
Output voltage
in Canada
Wavetek Meterman
400 Britannia Rd. E.Unit #1
Mississauga, ON L4Z 1X9
Tel: (905) 890-7600
Fax: (905) 890-6866
FG2C
0.3 Hz to 3 MHz (7 Range)
>10Vpp (into 50Ω load)
50Ω ±10%
-20dB ±1dB x2
<-5V to >+5V (into 50Ω load)
80%:20%:80% to 1MHz Continuously variable
N/A
±5% +1 Hz (at 3.0 position)
≤1 %, 0.3 Hz to 200 kHz
THD ≤35dB below fundamental in all ranges
(Specification applied from MAX. to 1/10 level)
< 0.3dB, 0.3 Hz to 300 kHz
< 0.5dB, 300 kHz to 3 MHz
≥ 98 %, 0.3 Hz to 100 kHz
≥ 95 %, 100 kHz to 3 MHz
±2%, 0.3 Hz to 100 kHz
≤ 100ns at maximum output.
(into 50Ω load)
4Vpp ±1Vpp to 14.5Vpp
±0.5Vpp adjustable
≤ 120ns
≥ 3Vpp
20 TTL load
≤ 25ns
0 to 10V ±1V(100:1)
10kΩ ±10%
N/A

FG3C

0.3 Hz to 3 MHz (7 Range)
>10Vpp (into 50Ω load)
50Ω ±10%
-20dB ±1dB x2
<-5V to >+5V (into 50Ω load)
80%:20%:80% to 1MHz Continuously variable
6 digits; 7.6mm (0.3 in) high
N/A
≤1 %, 0.3 Hz to 200 kHz
THD ≤35dB below fundamental in all ranges
(Specification applied from MAX. to 1/10 level)
< 0.3dB, 0.3 Hz to 300 kHz
< 0.5dB, 300 kHz to 3 MHz
≥ 98 %, 0.3 Hz to 100 kHz
≥ 95 %, 100 kHz to 3 MHz
±2%, 0.3 Hz to 100 kHz
≤ 100ns at maximum output.
(into 50Ω load)
4Vpp ±1Vpp to 14.5Vpp
±0.5Vpp adjustable
≤ 120ns
≥ 3Vpp
20 TTL load
≤ 25ns
0 to 10V ±1V(100:1)
10kΩ ±10%
To set the voltage between
0 to 2V as per different frequency.
- 9 -
in Europe
Wavetek Meterman
52 Hurricane Way
Norwich, NR6 6JB, U.K.
Tel: int + 44-1603-404824
Fax: int + 44-1603-482409