Dust Extraction; Service And Maintenance - Festool ASA 5000 Manual De Instrucciones Original

ASA
GB
8

Dust extraction

WARNING
Dust hazard
Dust can be hazardous to health. Always work

with a dust extractor.
Always read applicable national regulations be-

fore extracting hazardous dust.
If national safety regulations stipulate that dust ex-
tractors must have a suction power monitoring func-
tion (volumetric flow monitoring), only one extractor
opening on the EAA can be opened.
The slide prevents the use of both openings. If the
slide is removed, e.g. when extracting non-hazard-
ous dust, the system can operate and extract from
two machines at the same time (see EAA operating
manual).
9

Service and maintenance

WARNING
Risk of accidents
Disconnect the EAA/ASA from the power and

compressed air supply before performing any
maintenance and repair work.
All maintenance and repair work on the electri-

cal or electronic system must always be carried
out by a qualified electrician.
Damaged safety devices and components must be
repaired or replaced in a recognised specialist work-
shop, unless otherwise indicated in the operating
manual.
Customer service and repair only
through manufacturer or service work-
shops: Please find the nearest address
at:
www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at:
5
www.festool.com/Service
3
2
1
10Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applicable
national regulations.
12
EU only: In accordance with European Directive 2002/
96/EC on waste electrical and electronic equipment
and implementation in national law, used electric
power tools must be collected separately and handed
in for environmentally friendly recycling.
Information on REACh:www.festool.com/reach
11 Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your working results and limit any war-
ranty claims. Machine wear or your own personal
workload may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
12 EU Declaration of Conformity
ASA boom arm
ASA 5000 CT/SRM
ASA 6000 CT/SRM
ASA 5000 TURBO
ASA 6000 TURBO
Year of CE mark: 2008
We declare under sole responsibility that this product
complies with all the relevant requirements in the
following Directives, standards and normative docu-
ments:
2006/95/EC; 2004/108/EC, 2011/65/EU, EN 60204-1,
EN ISO 12100-1, EN ISO 12100-2, EN 61310-1, EN 983
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical Docu-
mentation
19.12.2012
Serial no.
495831
495833
495830
495832