Symbol Function; Timer Function; Wall Mounting - Beem Air Joy Hot & Cool Manual De Instrucciones

Air Joy Hot & Cool
Operating with
the remote control
You can control all electrical functions
of the appliance with the remote control.
Each push of a button is acknowledged by
a beep.
Symbol Function
Switching the appliance ON/
OFF
-
Decrease cold airflow
+
Increase cold airflow
Switch warm airflow on/off
Switch rotation
movement ON/OFF
Timer, 60 minutes
60
Timer, 120 minutes
120
NOTE
► Make sure that there is an an unob-
structed view between the appliance
and the remote control in order to
control it with the remote control.
► All settings made via the remote
control are confirmed by a beep.
24

Timer function

The appliance is equipped with a timer
function for 60 or 120 minutes. To activate
this, proceed as follows:
During operation, press the
‹
the remote control. The appliance
switches itself off automatically after
60 minutes.
To deactivate the timer, press the
‹
button again.
60
To activate the timer for 120 minutes,
‹
press the
120
function, press the

Wall mounting

(see images C1 and C2)
It is possible to mount the appliance on a
wall. To do this, proceed as follows:
Screw the mounting plate to the dow-
‹
eled wall with the three screws sup-
plied (7) so that the fixing elements
are pointing upwards.
Hang the appliance onto the mounting
‹
plate.
Direct the airflow.
‹
Connect the appliance to the mains
‹
and switch it on.
BEEM - Elements of Lifestyle
EN
on
60
. To deactivate this
.
120