Running Initial Setup - Sony BRAVIA KDL-22EX350 Manual De Instrucciones

Running Initial Setup

During initial setup, you will perform the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Scan for digital and analog channels
• Set the current time
Complete your cable connections before beginning the Initial Setup. Refer to the Quick
Setup Guide (supplied) for sample connection diagrams.
Initial Setup
Please select your language:
English
Español
Français
Confirm Confirm Confirm Confirm
2
Use the remote control buttons described below to navigate through the Initial
Setup.
3
Auto Program will scan for available channels from the signal source directly
connected to the TV's CABLE/ANTENNA input. Follow the help text provided on the
screen to run the Auto Program.
• If you cancel the Auto Program, any channels you have
selected are not registered. To rescan for available
channels, run Auto Program.
• Connect either your cable or antenna to the TV (you can
connect both using an A-B RF switch (not supplied)); for
more details see page 11.
• When promoted to select Retail or Home, be sure to
select Home for ENERGY STAR compliant mode.
20
US
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
1
Turn on the TV.
The Initial Setup screen will appear.
Location
Please select the type of use for this TV.
"Home" optimizes the picture for normal home use and is ENERGY
STAR qualified.
"Retail" optimizes the picture for store display.
Home
Retail
Confirm Confirm RETURN Back