Technical Data; Machine Components; Ce Declaration Of Conformity - Collomix C-mix M1000 Manual De Servicio

EN

Technical data

Rated power/Current consumption:
Power supply:
Frequency:
No-load speed, first gear
second gear
Rpm under load, first gear
Maximum mixing tool diameter:
Weight w/o mixing tool:
Protection class:

Machine components

1 Release button for ON/OFF switch
2 ON/OFF switch
3 Gear selection switch (for M 1400)
4 Handle frame
5 Handles
6 Ventilation slits
7 Neck of the machine
8 Mixing shaft
9 HEXAFIX adapter
10 Mixing tool
Noise/vibration levels
Measured values determined in accordance with
EN 60745. The A-weighted noise level of the
machine is typically:
Sound pressure level
L [dB(A)]
pA
M 1000 89 dB(a)
M 1400 88 dB(a)
Uncertainty K = 3 dB
Overall vibration level (for mixing of mineral
materials)
Emission level a
M 1000 R: 2,37 m/s
M 1400
Uncertainty K = 1,5 m/s
second gear
Sound power level
L [dB(A)]
WA
100 dB(A)
98 dB(a)
[m/s ]
2
n
/ L: 2,22 m/s
2
2
M 1000
1010 W
230-240 V
50/60 Hz
- 800 min
-1
- 630 min
-1
120 mm
4,2 kg
q / II

WARNING:
The measured values which are provided apply to
new machines. Noise and vibration levels change
with day-to-day use.

NOTE
The vibration level given in these instructions was
measured in accordance with a standardized method
of measurement as defined in EN 60745 and can be
used for the purposes of comparing electrical tools
with each other. It is also suitable for a preliminary
estimation of vibration strain. The vibration level
which is given represents vibration level for the
primary use of the electrical tool. If, however, the
electrical tool is used for any other purposes,
with different plug-in tools or with insufficient
maintenance, the vibration level may vary. This can
result in a significantly higher level of vibration strain
over the work period as a whole.
For a precise estimation of the vibration strain the
times when the machine is switched off have to be
taken into account as well, as do the times when it is
running but is not actually being used. This can result
in a significantly reduced level of vibration strain over
the work period as a whole.

CE Declaration of Conformity

We declare, with sole responsibility, that this
product complies with the following standards or
normative products: EN ISO 12100:2010, EN55014-
1:2006+A1+A2,
2:2014, EN61000-3-2:2013 in accordance with the
provisions of directives 2006/42 EC, 2014/30/EU,
2
2011/65/EU.
Technical documentation can be requested from:
Collomix GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
M 1400
1400 Watt
230-240 Volt
50/60 Hz
- 600 min
-1
- 910 min
-1
- 400 min
-1
- 620 min
-1
140 mm
5,2 kg
q / II
EN55014-2:2015,
Gaimersheim, 2016-11-29
Alexander Essing
Managing Director
EN61000-3-