Peaq PDR261BT-B Manual De Instrucciones página 25

LANGUAGE
1. Press MENU and enter System settings to
select the submenu LANGUAGE.
2. Select a language and confirm with SELECT.
FACTORY SETTINGS
Select menu option [Factory reset] with
confirm with SELECT.
SOFTWARE UPDATE
You can search software updates with the product.
Once you have accepted the conditions for use,
the download and installation procedure for the
new software updates begins automatically.
Note
Make sure that the product is connected to the
Internet.
SOFTWARE UPGRADE
Installation of the new Software-Updates.
SETUP WIZARD
Press MENU and enter System settings to select
the submenu SETUP WIZARD. You can set up all
settings important for bringing radio into operation.
INFO
Here you can find the version number of the
currently used software.
BACKLIGHT
1. During System settings mode, Press
select Backlight and then press SELECT to
confirm.
2. For the other settings under Backlight, press
/ buttons to select the following options and
then press SELECT button to confirm.
Operation mode High/ Medium/ Low
Standby Mode
IM_PDR261BT-B_190923_V04_HR.indb 25
/ and
/
Time out: 90 sec / 120
sec / 180 sec
Standby Level:
Medium/ Low
SETTING THE ALARM TIME
Make sure the clock shows the correct time.
1. Press ALARM button to choose following
options:
• [Alarm 1]
• [Alarm 2]
2. Press SELECT to access the Alarm Wizard.
1. ALARM
Activate alarm (Enable)
Select how the alarm clock should be switched
on:
• Select off to deactivate the alarm.
• Select daily, once, weekend or week days to
activate the alarm.
Note: Alternative you can call up the alarm via
main menu.
2. Time
Set the time at which the alarm should be set.
3. Mode
Select the mode for the alarm clock here:
• Buzzer: Wake up with alarm tone
• Internet Radio: Wake up with Internet radio
• DAB: Wake up with DAB-Radio
• FM: Wake up with FM-Radio
Note: In radio mode, the last station you
listened is automatically selected, unless you
save a new station.
4. Preset: Last listened
Select the station you want to activate with the
radio mode.
to
Note
• This menu is only available under radio modes.
• The last listened station is set as default,
unless you select a new station.
5. Volume
Here you can set the volume with which the
alarm clock will be switched on.
6. Save
Save the alarm setting.
7. Switching off the alarm tone
Once the alarm sounds, press POWER button
and the alarm is switched off.
Note
The alarm will automatically turn off after 60
minutes.
ENGLISH
25
23/9/19 6:04 pm