Contents
Test For Ground Continuity ................................................................................................................ 2
Using the Vacuum...................................................................................................................
Replacing Parts ............................................................................................................................ 6
Replacing Parts/ Replacing Primary Filter ................................................................................................
Parts Explosion ....................................................................................................................................
Parts Explosion/ Car Unit .................................................................................................................. 7
Dimensions ................................................................................................................................. 10
Wirings Diagrams ........................................................................................................................ 11
Applications ........................................................................................................................................
Grounding Instructions ................................................................................................................... 12
Tools and Attachments ...........................................................................................
Warranty ................................................................................................................................
Accessories ................................................................................................................................. 14
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE USING THE MACHINE
CAUTION: THE OPERATOR SHOULD TEST THE HOSE CONTINUITY PATH BEFORE EACH USE
TEST FOR HOSE CONTINUITY PATH
Attach the conductive suction hose to the inlet of the machine.
Using an appropriate continuity tester, measure the resistance between the accessory coupling and
the inlet of the machine.
The resistance of this continuity path should not exceed
1 Megohm (1,000,000 ohms).
WARNING: If unacceptable results are recorded, DO NOT OPERATE THE CLEANER.
Using the tester, check for continuity between each connection of the vacuum
cleaner (example: tool to wand, wand to hose, hose to machine, etc) If the problem
can not be corrected refer the unit to an AUTHORIZED SERVICE CENTER ONLY.
INSTRUCTIONS FOR USE
PAGE 2
Page
3
3
4
5
6
7
12
..........................
12
13