Comunello R-Control Serie Manual De Instrucciones página 16

3. TRASMITTER R1-CONTROL
IAll the transmitters R1-CONTROL allow controlling 1 automation or group of automations for awnings and shutters.
3.1 FUNCTIONING OF THE BUTTONS UP, DOWN AND STOP
UP Activates the automation GOING UP.
DOWN Activates the automation GOING DOWN.
STOP It stops the automation.
3.2 FUNCTIONING OF THE BUTTON PROG AND DIP-SWITCHES
The button PROG and the DIPSWITCHES program the functions of the control units controlled by the transmitters
R1-CONTROL. Read carefully the section "PROGRAMMING OF THE FUNCTIONS BY R-CONTROL TRANSMITTERS" in
the handbook of the control unit or in the one of the tubular motor with integrated electronic card.
4. TRASMITTER R6-CONTROL
4.1 Functioning of the buttons UP, DOWN and STOP
UP Activates the automation GOING UP.
DOWN Activates the automation GOING DOWN.
STOP it stops the automation.
4.2 Functioning of the button SELC
By this button it is possible to select the channel to be used for the radio transmission.
1. Press button SELC until selected the desired channel: the corresponding led is on for some seconds.
2. Press one of the buttons UP, DOWN or STOP to transmit the control.
To select all the channels at the same time press several times the button SELC until all the leds are on.
To display the channel set, press once the button SELC.
4.3 Functioning of the button SELG
By this button it is possible to program and select the GROUPS of channels to be used for the radio transmission. It
16