Reliable MAVEN 120IS Manual De Instrucciones página 18

DRAINING THE WATER TANK
Disconnect the iron from the main supply outlet
1. Pull out the water tank (Figure 9).
2. Open the Water Inlet Cover and drain the water tank (Figure 10).
3. Put the water tank back and make sure that it is firmly positioned in place
(Figure 11)
FIGURE 9
ANTI-SCALE CARTRIDGE
This appliance has an anti-scale cartridge to prolong its
lifespan.
1. When the anti-scale cartridge indicator lights up and
beeps, it indicates the anti-scale cartridge needs to be
changed. It is very important to change the cartridge
before continuing to iron.
2. Remove the cover from the new anti-scale cartridge.
3. Immerse the new anti-scale cartridge into water
for 5 minutes (Figure 13) before first use for better
performance.
4. Press to release the cartridge from the appliance (you
will hear a beep) and pull out the old cartridge from the
appliance (Figure 14). Caution: The cartridge can be very
hot due to the heat from the soleplate. Make sure the
cartridge has cooled down before pressing it.
5. Insert the new anti-scale cartridge (Figure 15)
FIGURE 13
16
FIGURE 10
FIGURE 14
FIGURE 11
FIGURE 12
FIGURE 15