Trust Racing Wheel GXT 580 Manual De Usario página 6

GXT 580 Racing Wheel – USER'S MANUAL
- USER'S MANUAL
3. Steering Sensitivity
Press SELECT + START simultaneously for 3 seconds  green LED turns on.
Press SELECT to see the current sensitivity.
Press SELECT again to cycle through the sensitivity levels.
Press D-Pad ↑ to confirm the sensitivity level.
Sensitivity level; Low = Green LED flashes slowly.
Sensitivity level; Middle = Green LED flashes.
Sensitivity level; high = Green LED flashes fast.
4. Button Relocation
The L-Pedal, R-Pedal, L3 and R3 can be programmed as X, Y, A, B, L1, R1, L2, R2.
Press SELECT + START simultaneously for 3 seconds  green LED turns on.
a
Press the button that you wish to relocate  LED starts flashing.
b
Press the new button function  LED turns off  relocation is complete.
c
Repeat the above steps to relocate further control buttons.
Once powered off, all settings will be erased.
Make sure that the button relocations are deleted before changing to a different driving game, otherwise the
controls may not match the new game.
Clear Button Relocation
Press SELECT + START simultaneously for 3 seconds  green LED turns on.
Press the button to delete the relocation on  LED starts blinking.
Re-press the button  LED turns off  deletion is complete.
Repeat the above steps to clear any other button relocations.
Restore factory defaults
Press SELECT + START simultaneously for 3 seconds  green LED turns on.
Press and hold the START key until the LED turns off.
-All button functions have been restores to the factory defaults.
3