Product Description; Technical Data; Components; Factory Setting On Delivery - Steelcase Ology Instrucciones De Uso

_______________________________________________________________
3

Product description

For dimensions and weight of your product, please
refer to the delivery note.

3.1 Technical data

Ology – two table
legs
Dimensions and See delivery note
weight
Mains voltage 230 V AC
Rated frequency 50 Hz
Maximum load Approx. 75 kg /
capacity 750 N
Maximum "on" int. 10% max.,
duration 2min. ON /18 min.
OFF
Maximum
adjustment range:
720 mm to 1200
single telescope
mm
650 mm to 1250
double telescope
mm
Noise emission <60 dB (A)
Max. power 300 W
consumption
during lifting
Power ≤ 0.1 W
consumption in
standby mode
Maximum effective 0.06 dBm
radiated power
Type plates are located on the controller housing, on
the columns and under the desktop.
Name plate: symbols - explanation
Double insulation. Double insulated
cables minimise the risk of electrical
shock.
For indoor use. Indicates that
placing the product outdoors is not
allowed.
CE marking. Symbolises the
conformity of the product with the
applicable requirements that the
European Community places on the
manufacturer.
4
Ology – three table
legs
See delivery note
100-240 V AC
50-60 Hz
Approx. 75 kg /
750 N
int. 10% max.,
2min. ON /18 min.
OFF
720 mm to 1200
mm
650 mm to 1250
mm
<60 dB (A)
450 W
≤ 0.1 W
0.06 dBm
Recycling symbol. Indicates
conformity with the regulations for
Waste of Electrical and Electronic
Equipment (WEEE) and the Federal
Electrical and Electronic Equipment
Act (ElektroG). Electrical and
electronic products must be disposed
of separately from household waste at
the end of their service life.
The CE marking is located on the underside of the
desktop and can be viewed at any time.

3.2 Components

The Ology desk is essentially comprised of the
following components (you can find the variant
descriptions in the respective chapters):
■ Desktop with plastic parts for desktop mounting
■ Ology: Columns with sheet steel runners (see
variants Basic, Telescopic, Crank, Lift 1, Lift 2),
welded, including adjustment screw for
compensating floor unevenness, cable duct
(optional)
■ Ology Bench: Columns without runners, cross
brace (welded), central cable duct with
counterweights to reduce the risk of tipping over
■ Top cantilever left / right
■ Horizontal structural tube
■ Manual height adjustment (telescopic or crank)
■ Optional electrical height adjustment:
Lift 1: Electric motor (720...1200), in column
–
Lift 2: Electric motor (650...1250), in column
–
Control system for lift height
–
Standard: Simple Touch operating panel
–
Optional: Operating panel with height
–
display; programming functions for two
desktop heights
All available components are specified in the separate
technical description and in the price list.

3.3 Factory setting on delivery

■ Variant - Basic: 740 mm
■ Variant - Telescopic: 740 mm
■ Variant - Crank 740 mm
■ Lift 1 variant: 740 mm
■ Lift 2 variant: 740 mm
Product description
120917