Cameo ROOT PAR 4 Manual De Usuario página 11

STANDALONE MODE STATIC
The standalone mode static allows the dimmer, strobe, R, G, B and W values and the R, G, B, W, A and UV values to be set directly on the
device, with values between 000 and 255, in a similar way to with a DMX controller. In this way, an individual scene can be created without
an additional DMX controller.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select standalone mode Static and confirm with ENTER. Using UP and DOWN, now select
the menu item that you wish to edit and confirm with ENTER. You can use UP and DOWN to configure the desired value between 000 and
255. Confirm all entries with ENTER.
--------Menu------- ----Standalone----
DMX Address
Auto
DMX Mode Static
DMX Delay
Color Preset
Standalone User Color
Slave
Loop
Settings
System Info
STANDALONE MODE COLOR PRESET
15 different color presets, plus Jump and Fade, are available as preset programmes. The brightness can be separately set for each preset
and the running speed for Jump and Fade.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select standalone mode Color Preset and confirm with ENTER. Now use UP and DOWN to
select the desired color preset and confirm with ENTER (Off = blackout, Speed refers to Jump and Fade). You can now use UP and DOWN to
set the desired brightness between 000 and 100. Confirm with ENTER.
--------Menu------- ----Standalone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Standalone User Color
Slave Loop
Settings
System Info
STANDALONE MODE USER COLOR
The standalone mode User Color allows you to store four individual color presets of overall brightness, strobe and a color blend of R, G, B
and W or R, G, B, W, A and UV directly in the device.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select the standalone mode User Color and confirm with ENTER. Using UP and DOWN,
now select the desired preset (color 1 to 4) and confirm with ENTER. Using UP and DOWN, now select the menu item that you wish
to edit and confirm with ENTER. You can use UP and DOWN to configure the desired value between 000 and 255. The strobe effect values
correspond to those in channel 2 of the DMX table 5 CH Mode 1 and channel 3 of table 10 CH Mode. Confirm all entries with ENTER.
--------Menu-------
----Standalone----
DMX Address
Auto
DMX Mode Static
DMX Delay
Color Preset
Standalone User Color
Slave
Loop
Settings
System Info
CLROOTPAR4 CLROOTPAR6
----Static Mode---- -----Static Mode-----
Dimmer 0–255 Dimmer
Strobe 0–255 Strobe
Red 0–255 Red
Green 0–255 Green
Blue 0–255 Blue
White 0–255 White
Amber
UV
----Color Preset----
Off
Cyan
Red
0–100 Blue
Amber 0–100
Lavender
Yel Warm
0–100 Mauve
Yellow 0–100
Magenta
Green
0–100 Pink
Turquoise 0–100
Warm White
CLROOTPAR4
----User Color----
-------Color x-------
Color 1
| Dimmer
Color 4 Strobe
Red
Green
Blue
White
0–255
0–255
0–255
0–255
0–255
0–255
0–255
0–255
ROOTPAR4
0–100 White 0–100 White
0–100 Cold White
0–100 Cold White
0–100 Jump 0–100 UV
0–100 Fade
0–100 Jump
0–100 Speed 0–100 Fade
0–100
Speed
0–100
CLROOTPAR6
-------Color x-------
Dimmer
0–255 0–255
0–255 Strobe 0–255
0–255 Red 0–255
0–255 Green 0–255
0–255 Blue 0–255
0–255 White 0–255
Amber 0–255
UV 0–255
ROOTPAR6
0–100
0–100
0–100
0–100
0–100
0–100
11