General Instructions - LD Systems MAUI 11 G2 Manual De Usuario

C. Speaker column

GENERAL INSTRUCTIONS

Before startup, the subwoofer of the LD Systems MAUI11G2 array system must be placed
upright on its feet, on a flat surface. Never operate your system on a trolley, as there is a risk
that the entire system might be unstable. Accidents and damage may result. To ensure ade-
quate cooling, during operation a minimum distance of 50 cm must be maintained between
the back of the subwoofer and other objects such as walls for example.
Please ensure the correct connection of audio and power for the system and all connected
devices such as mixers, CD players, etc. Use only undamaged cables of suitable diameter
and always unwind cable reels completely. If necessary, use cable bridges to avoid tripping
over loose cables. Never place the device directly on an edge. Do not place the subwoofer
on a table. To avoid unwanted background noise when turning on connected devices, always
turn on the system last and turn it off first.
SETUP
The LD Systems MAUI11G2 array system consists of three components:
A. Subwoofer with integrated electronics for all system components.

B. Spacer column with connectors on bottom and top.
C. Column element with the speakers and a connection on the bottom.
B. Spacer column
After setting up the subwoofer at the desired location, the spacer column is plugged into
the subwoofer, and then the column element with 8 midrange drivers and the tweeters onto
the spacer column (please pay attention to the symbols on subwoofer, spacer column and
speaker columns, see drawing). Steel guiding pins facilitate the correct installation and
ensure at the same time a secure hold. Using the optional accessories, it is possible to have
two variants of wall mounting and two variants of mounting on stands.
CONNECTION AND OPERATION
The device allows both the volume of the entire system and the volume of the subwoofer
in relation to the total volume to be adjusted separately. Source devices can be connected
using both balanced and unbalanced cables (XLR / 6.3 mm jack / RCA / mini jack). The
integrated 4-channel mixer offers a microphone input, a high-impedance instrument input
for an electric guitar for example, an input for source devices with line level and furthermore
a Bluetooth unit, which can be used in parallel to the 3.5 mm mini-jack input.

A. Subwoofer
5