Cleaning And Maintaining; Cleaning External Parts - Keurig Mr. Coffee BVMC-SC Serie Manual Del Usuario

Cafetera individual
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING AN D M A I N TAINI NG YO UR S IN GL E SE RVE 1 .0

Cleaning External Parts

CAUTION: Make sure the Brewer is unplugged before cleaning.
Regular cleaning of the Brewer's external components is recommended.
1. The Housing and other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
CAUTION: Never immerse the Brewer in water or other liquids.
2. The Drip Tray can accumulate liquids. The Drip Tray and Drip Tray Plate should be
periodically inspected and cleaned with a damp soapy nonabrasive lint free cloth.
The Drip Tray and Drip Tray Plate should not be put into the dishwasher. To remove
the Drip Tray Assembly, simply slide it toward you, keeping it level at all times to
avoid spilling.
Cleaning the K-Cup
1. Cleaning the Parts – The K-Cup
can be placed onto the top shelf of a dishwasher.
NOTE: Use low temperature cycles in the dishwasher. To
remove from the Brewer, pull forward the front face
of the Brewer. Grasp the top of the K-Cup
Holder with one hand while pushing up on the
bottom of the K-Cup
with the other until it releases. After cleaning, align
the K-Cup
two front ribs as a guide, and snap into place from
the top.
2. Cleaning the Funnel – The Funnel can be removed from
the K-Cup
Pack Holder by pulling on it until it snaps off
®
(fig. 1). The Funnel is dishwasher safe. To replace it, just
snap it back onto the K-Cup
3. Cleaning the Exit Needle – The Exit Needle is located on
the inside bottom of the K-Cup
12
®
Pack Holder from underneath
®
Pack Holder with the opening using the
®
Pack Holder Assembly.
®
®
Pack Holder Assembly
Pack Holder Assembly
®
Pack
®
Pack Holder Assembly.
FIGURE 1
!

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido