Publicidad
Tools Required for Pizza Oven Kit Installation:
Skid steer loader or other type of machinery
with forks capable of lifting 1000lbs
Heavy duty nylon lifting straps (minimum 15' in
length)
Safety Goggles
Ear Protection
Dust Mask
Gloves
Shovels (digging & flat)
Metal Cutters for banding on cubes
Mason Hammer (chipping hammer)
Road Stone Rake
Tamper (Hand or Mechanical)
Wheelbarrow
Level (2' and 6' recommended)
Speed Square
Caulk Gun 10 oz or 28 oz (depends on what size
adhesive is purchased)
Rubber Mallet
14" Demo saw with diamond blade
Tape Measure
Marking Device (pencil, soap stone, etc)
Chalk Line
Hand Broom
Concrete Tools (Trowel/Floats)
6 Foot ladder or scaffold according to your com-
pany's state, and OSHA safety policy
Drill & 1/16" bit
5/16" nut driver
7 ¼" Circular saw with wood blade
4" Electric grinder
4" Diamond cup grinder
Cambridge Pre-Packaged / Pre-Cut
MaytRx Wall Pizza Oven Kit
4
Items Included in the Pizza Oven Kit:
1 - Pizza Oven
8 - 48" Reinforced concrete lintels
1 - Plastic shim pack for leveling lintels or block
as needed
2 - Pallets of Cambridge Maytrx Wall
3 - Pallets of Pre-Cut Wall Pieces
1 - Pallet of Cast Stone Pieces
1 - Installation manual for concrete pad and
Maytrx Wall
1 - Care & Cooking Package which includes:
13" Rectangular Pizza Peel
8" Round Pizza Peel for rotating and removing
pizza
Adjustable Brush with copper bristles
Oven rake
Oven Ash shovel
Wall mounted Peel rack
Material Required:
¾" clean stone (approx. 3/4 ton)
Concrete (approx. 48-80 lb bags)
Cambridge concrete adhesive (approx. 6-29 oz. or
17-10.3 oz. tubes)
(4 pcs) 2" x 4" x 8' lumber
2 ½" wood screws
½" rebar (approx. 66')
Silicone for flashing
2011
Publicidad
