GLIDEAWAY Comfort Base Manual De Instrucciones página 9

ASSEMBLY - BASE
TWIN/TWIN XL/FULL/SPLIT CAL KING
C
Route the DC power cord to the control
box, snapping the cord into the clip at the
head of the bed as shown. Place Base on
foundation or platform bed.
If connecting two bases to form a king,
repeat steps 1 to 4 for the second Twin
XL base, then continue to step 5.
CONNECTING TWO TWIN XL OR SPLIT
CAL KING BASES TO FORM A KING OR CAL
KING:
D
Lift the head section of each base.
Connect the sync cable to the control box
to one base. Route the sync cable and
snap into clip with power cord (as shown).
Connect the other end of sync cable to
second control box of other base making
sure to route the sync cable thru the clip
on second base (as shown).
Continue with step 5 on page 11.
8