Attaching The Drinking Cup And Blending; Risk Of Injury - Ambiano ABC-015-3NG Manual Del Usuario

Use

Attaching the drinking cup and blending

CAUTION!

Risk of injury!

Improper handling of the personal drink mixer may result in
injury.
− The blades are very sharp. Be careful when handling the
blade assembly.
NOTICE!
Risk of damage!
Improper handling of the personal drink mixer may result in
damage to the personal drink mixer.
− The personal drink mixer is designed for short operation
not to exceed 1 minute. Let the personal drink mixer cool
off completely before using it again.
− Do not use the personal drink mixer to chop dry and
hard food (nuts, coffee beans etc.). Otherwise you could
damage the bearing and the blades.
1. After filling the drinking cup
assembly 3
blade assembly has been securely fastened (see fig. B).
2. Turn the drinking cup, with the blade assembly attached, upside down.
Align the arrow on the side of the blade assembly with the unlocked lock
symbol on the motor unit
3. Use a small amount of force to push the drinking cup down securely into
the motor unit and then turn it clockwise until the arrow mark on the blade
assembly points to the closed lock symbol (see fig. D).
4. Plug the personal drink mixer into a properly installed socket to turn it on
and start blending the ingredients.
5. To turn off the personal drink mixer, unplug it.
14
2
onto the drinking cup by turning it clockwise. Make sure the
(see fig. C).
4
with ingredients, screw the blade