Technical Specifications - ardistel A3-18469 Manual De Instrucciones Y Guía Del Usuario

COMPACT HEADSET FOR PS3™ (and other Bluetooth® devices)
CONTENTS
1x Bluetooth® Compact Headset.
1x USB/DC charging cable.
1x Ear hook.

TECHNICAL SPECIFICATIONS

• Compact Headset Bluetooth® v3.0+EDR compatible* with PS3™, mobile phones, SmartPhones, PC
and Tablets through Bluetooth® wireless connection.
• Only for gaming, online chat, VoIP and hands-free calls in compatible devices and software.
• Includes USB charging cable for charging the built-in battery pack (battery life: up to 3h approx. in
conversation, 100h approx. on standby).
• Volume control and multi-function button included.
• Connection range: up to 10m approx.
PAIRING TO PS3™ SYSTEM
First of all, connect the USB/DC to the Headset and to a free USB slot on your system or PC. At this time,
the LED will turn on in red colour to indicate that the built-in battery pack is charging, turning into blue
colour when the charging process has finished. Once the charge is completed, follow the steps below
for pairing the Headset with your PS3™:
1. Power on your system and go to "SETTINGS" menu.
2. Then, go to "ACCESSORY SETTINGS" and select "MANAGE BLUETOOTH DEVICES".
3. A message will show on screen "DEVICE NOT REGISTERED. DO YO WISH TO REGISTER IT?". Using
the control pad, select "YES", and then press "X" button to accept the setting and finally press "X" again
to "START SCANNING".
4. During the scan process, press and keep pressed some seconds the central button in the Headset
until the LED indicator will remain turned on in blue colour.
5. After a few moments, the screen will show a message indicating that a device has been found with
the ID labelled as "BT A3-18469", then press "X" button to select it.
6. The PS3™ system will request for a pass key. Input the number 0000, select OK and press again the
"X" button.
7. The screen will inform that the "REGISTER COMPLETED".
8. Once the registration has been finished, go back to "SETTINGS" menu and then to "AUDIO DEVICE
SETTINGS".
9. In this section, select the device labelled as "BT A3-18469" as input device. Also please make sure
that the output device is selected with the same device, "BT A3-18469", and check the microphone and
the Headset just speaking to it.
10. Now your device is ready to use.
PAIRING WITH MOBILE PHONE, PC OR TABLET
First of all, make sure that the Headset built-in battery pack is fully charged and the device you wish to
pair to is compatible with Bluetooth® audio devices and it has this setting activated from device
settings menu. Then, follow the steps below for pairing the Headset:
1. With the device powered on, go to SETTINGS/CONNECTIONS (or similar names) and activate the
Bluetooth® connection settings in the device.
2. From this section, activate scanning process looking for Bluetooth® devices on the range.
3. During the scan process, press and keep pressed some seconds the central button in the Headset
until the LED indicator will remain turned on in blue colour.
4. After a few moments, the screen will show a message indicating that a device has been found with
the ID labelled as "HEADSET BT", then select it to complete the pairing process.
5. It is possible that your mobile phone, PC or Tablet requests a pass code. If so, input the number 0000.
USER GUIDE AND INSTRUCTIONS MANUAL
*NOTE: Compatibility subject to product manufacturing date and software and/or device used.
5
EN