Hama 00176566 Instrucciones De Uso página 3

6. Safety notes
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• This product is intended for private, non-commercial
use only.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not drop the product and do not expose it to any
major shocks.
• Do not modify the product in any way. Doing so voids
the warranty.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not operate the product outside the power limits
given in the speci cations.
• Use the item only in moderate climatic conditions.
• Do not use the product in moist environments and avoid
splashes.
• Do not mount the product above locations where persons
might linger.
• Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted. Also make
sure that there are no electric, water, gas or other lines
running through the wall at the mounting site.
• Pay attention to the applicable data protection
regulations before installing and using the product.
• Respect the personal and property rights of others. Do
not make recordings of other people with the Dashcam.
• Observe the right to one's own image and spoken word
when recording.
• The product is intended for indoor use only.
• Keep this product, as all electrical products, out of the
reach of children!
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, the adapter
cable or the mains cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
Warning
• Only operate the product from a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
• If using a multi-socket power strip, make sure that
the total power consumption of all connected
devices does not exceed the power strip's maximum
throughput rating.
• If you will not be using the product for a prolonged
period, disconnect it from mains power.
3