Hama 00096016 Instrucciones De Uso página 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
Controls and Displays
A) Remote control
1. Dimmer function (lighter in 6 increments) /
increase program speed
2. Constant red colour
3. Constant yellow-orange colour
4. Constant sunlight-yellow colour
5. Constant yellow colour
6. Constant yellow-green colour
7. Dimmer function (darker in 6 increments) /
decrease program speed
8. Constant green colour
9. Constant turquoise colour
10. Constant light blue colour
11. Constant sky-blue colour
12. Constant pale blue colour
13. OFF-Taste (Switch off)
14. Constant dark blue colour
15. Constant blue colour
16. Constant purple colour
17. Constant rose colour
18. Constant pink colour
19. ON button (Switch on)
20. Constant while colour
21. "Flash" program, colour changes in pulsating
pattern (7 colours)
22. "Strobe" program, brightness of white tone
changes (from light to dark)
23. "Fade" program, gradual colour transitions
(7 colours)
24. "Smooth" program, colour changes in pulsating
pattern (3 colours)+
B) LED band with control unit
25. USB cable
2
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• LED strip (2x 50 cm) with control unit
• USB cable
• Remote control
• 1x battery type: CR2025
• These operating instructions
Note
Please check that the set is complete before
using it and ensure that none of the parts is
faulty or damaged.
3. Safety Notes
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• The product is intended for private, non-
commercial use only.
• Use the product for its intended purpose only.
• Do not use the LED band while it is still in the
packaging or when it is rolled up.
• Do not operate the product outside the power
limits given in the specifications.
• Always pull directly on the plug when
disconnecting the cable, never on the cable
itself.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.