Mounting Ldmg2Sps - LD Systems MAUI G2 Manual De Usuario

MOUNTING LDMG2SPS

There are two ways to attach the MAUI G2 speaker column to the base.
1. Installation with the 55 mm rod attachment.
Attach the rod attachment to base C with M20 special screw B, ensuring a firm grip. Screw adapter D (with M20 thread) onto the rod attachment
as far as it will go. Now attach speaker column E flush to the adapter (slightly loosen the 3 mm hexagonal grub screws if necessary). Steel guide
pins facilitate correct assembly and at the same time ensure a secure hold. The electrical contact for the signal supply to the speaker column will
be automatically established. Now attach the adapter flush to the subwoofer with the 4 steel pins and connect both adapters using the supplied
speaker cable (4-core with speakON-compatible connectors).
2. Direct attachment to the base, without rod attachment.
Attach adapter D (with M20 thread) to base C with M20 special screw B, ensuring a firm grip. Now attach speaker column E flush to
the adapter (slightly loosen the 3 mm hexagonal grub screws if necessary). Steel guide pins facilitate correct assembly and at the same
time ensure a secure hold. The electrical contact for the signal supply to the speaker column will be automatically established. Now
attach the adapter flush to the subwoofer with the 4 steel pins and connect both adapters using the supplied speaker cable (4-core with
speakON-compatible connectors).
1
C
E
D
A
B
2
E
D
C
B
11