Panasonic CZ-RTC2 Manual De Instrucciones página 11

• Deleting the Program Timer
To delete the program timer setting, follow the steps below.
1. Press
2. Press
program you want to delete.
3. Press
4. Press
5. Press
Note
• After deleting, the unit returns to the program confi rmation
mode
• If you press
program comfi rmation mode.
• If there is no operation made for 3 minutes during the setting, the unit returns to the normal mode.
• Invalidating Program Timer
If you want to adjourn the program operation for more than 1 week, you can invalidate all the timer settings.
Once the timer settings are invalidated, the program will not be operated until the invalidation is cancelled.
<<How to invalidate the program timer>>
Press and hold
<<How to cancel the program timer invalidation>>
Press and hold
If Power Failure Occurred
If the power recovers in a short time period, the program after the recovered time will be valid.
If the power recovered more than 1 hour after the failure, the present time information will be lost. In this
case, the program will not be operated.
CZ-RTC2_Main.indb EN-9 CZ-RTC2_Main.indb EN-9
to enter the program confi rmation mode.
/ to select the day of the
/ to select a TIMER No. (from 1 to 6).
to display the program setting mode
to delete the program.
.
during the setting, the unit returns to the
for more than 2 seconds.
is displayed and the programs will be invalidated from the next one.
for more than 2 seconds.
disappears and the programs will be validated from the next one.
.
5 3
EN-9
4 1 2
2011/11/04 20:08:01 2011/11/04 20:08:01
EN