Instruction Manual - Makita DUR184L Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Type of handle
No load speed
Overall length
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
-
Nylon cutting head
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
-
Nylon cutting head
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
Nylon cutting head (P/N
197297-1)
Sound pressure level
average
L (dB(A))
PA
77
Left hand
2
a (m/s ) Uncertainty K (m/s
h,W
1.5
2.5
3.3 kg
BL1815N, BL1820, BL1820B
Sound power level average
L (dB(A)) Uncertainty K (dB(A))
WA
89
Right hand
2 2
) a (m/s )
h,W
2.5
15m(50 )
FT
7 ENGLISH
DUR184L
Loop handle
-1
5,000 / 6,000 min
1,534 - 1,634 mm
2.0 - 2.4 mm
300 mm
D.C. 18 V
3.6 kg
BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B,
BL1860B
Applicable standard
2.0 2000/14/EC
Applicable standard
2
Uncertainty K (m/s )
1.5 EN50636-2-91
The distance between the tool and
bystanders must be at least 15 m.
Keep bystanders away.
Keep distance at least 15 m.
Wear a helmet, goggles and ear protection.
Wear protective gloves.