on the capacity of the tank.
•
Fluid consumption will be significantly increased
during Continuous mode.
Manual Mode
To trigger the Stratus™ 1500 manually, do the fol-
lowing:
1. Set the desired output level with the OUTPUT
knob.
2. Press and hold the <MANUAL> button on the
wired timer controller. The LED indicator above
the button will light up. The fog machine will
output fog for as long as you hold down the
<MANUAL> button.
3. Release the <MANUAL> button to stop the fog
output.
The duration of manual fog at any given Output set-
ting is based on the capability of the fog machine.
Optional Wired Manual Remote
Control (FC-M)
The optional FC-M wired manual remote control
allows the user to start and stop the fog output.
It operates the same as the Manual button on the
product, with the addition of a READY indicator
LED.
1. Plug in the fog machine to power.
2. Plug in the wired manual remote control to the
Manual Remote Connector socket on the back
of the fog machine. (See the product Overview.)
3. Wait for the READY indicator LED to light up,
indicating the Stratus™ 1500 is heated enough
to produce fog. (Also see Fluid Tank Indicator
Lights.)
4. Press and hold the <FOG> button on the wired
manual remote control.
5. Release the <FOG> button to stop the fog output.
•
The Stratus™ 1500 unit may start producing fog
intermittently to allow for fluid reheating after a
period of continuous fog output. This is a normal
occurrence.
•
The duration of manual fog output is based on the
capability of the fog machine.
Optional Wireless Remote (FC-W)
The optional FC-W wireless remote allows the user
to trigger the Stratus™ 1500 to produce fog from up
to 100 ft away.
1. Plug in the fog machine to power.
2. Plug the FC-W wireless remote receiver into the
Wireless Remote Connector on the back of the
Stratus™ 1500. (See the product Overview.)
3. Allow the Stratus™ 1500 six to seven minutes to
heat up. (See Fluid Tank Indicator Lights.)
4. Press and hold the <1>, <2>, <3>, or <4> button
on the wireless remote. (Download the FC-W
User Manual from www.chauvetlighting.com for
more information on addressing the FC-W)
5. Release the button to stop the fog output.
•
Ensure the FC-W has an unobstructed view of the
receiver for maximum performance.
•
The <2>, <3>, and <4> buttons are reserved for
future use.
Fluid Tank Indicator Lights
The Stratus™ 1500 has indicator LEDs that light up
the fluid tank to indicate the status of the product,
as follows:
•
Red - The heater is currently warming up.
•
Flashing Red - The heater is currently warming
up and no fluid is detected.
•
Blue - The heater is ready to produce fog.
•
Flashing Blue - The heater is ready to produce
P. 9
English version
| Tecshow Stratus 1500