Quarkpro MINI-QUAD Manual De Usuario página 7

Pan invert - Pan Inversion
1.- Press the UP and DOWN button until "Pan Invert" is displayed, press ENTER
2.- To activate the Pan inversion press the UP or DOWN buttons until "yes" is displayed,
press ENTER to con rm. To deactivate Pan Inversion, select "No" and press ENTER.
Pan Angle
1.- Press the UP and DOWN button until "Pan Angle" is displayed, press ENTER
2.- Press the UP or DOWN button to set your rotation
Back LCD
1.- Press the UP and DOWN button until "Back LCD" is displayed, press ENTER
2.- Press the ON or OFF button to set your desired LCD mode
Show Mode - In this mode you can select your desired master mode
1.- Press the UP and DOWN button until "Show Mode" is displayed, press ENTER
2.- Press the ON or OFF button to set your desired Master mode
Slave Mode - In this mode the xture will be a slave
1.- Press the UP and DOWN button until "Slave Mode is displayed, press ENTER
2.- Press the UP or DOWN button to select Master or Slave Mode
Channel Mode - This will let you select you desired DMX channel mode
1.- Press the UP and DOWN button until "Channel Mode is displayed, press ENTER
2.- "X Ch" will now displayed, "X" represents the displayed DMX channel mode. Press the
UP or DOWN button to nd your desired Channel mode. Press ENTER to con rm
EN 6