Operating Mode - Hama Premium Instrucciones De Uso

4.2 Programming the switch-on and switch-off
times
You can set up to 16 switching times using the
"Premium" digital timer switch. The programming
required can be performed in just a few steps.
• Press the PROG button to switch to programming
mode. As when setting the time, HOURS, MIN-
UTES and WEEKS appears on the display.
• PROGRAM is also displayed on the bottom left.
1 ON is displayed next to this. 1 ON refers to the
switch-on time of the first programme.
• Pressing PROG a second time changes the display
from 1 ON to 1 OFF . This refers to the switch-off
time of the first programme.
• To select programmes 2 to 16, press PROG the
corresponding number of times.
1 ON 1 OFF
• After you have chosen a programme number, press
the SET button. A small triangle flashes in front of
the HOURS display. Set the desired hour using the
UP / CLEAR button.
• To switch to the minute setting, press SET again.
A small triangle flashes in front of the MINUTES
display. Press the UP / CLEAR button until the
desired minute value is displayed.
• After you have entered the time, you can select the
day of the week. To do so, press the SET button again.
The small triangle begins to flash in front of WEEKS ,
indicating that the device is ready for your entry.
• You can choose from the following options using
UP / CLEAR:
MO > TU > WE > TH > FR > SA > SU
MO TU WE TH FR
SA SU
MO TU WE TH FR SA
MO WE FR
TU TH SA
MO TU WE
TH FR SA
MO TU WE TH FR SA SU
• If you have correctly entered the time and day(s) of
the week for the switch-on time (e.g. 1 ON ), press
PROG again in order to set the switch-off time
(e.g. 1 OFF ). To enter the time, repeat the steps
outlined above.
4
......16 ON 16 OFF
• Press CLOCK / OK to leave programming mode.
• If no button is pressed for an extended period of
time during programming, the display returns to the
current time. Your confirmed entries will be saved.
Note
• To change a program that has already been
created, repeat the steps outlined above.
• To delete a switch-on or switch-off time, first
press PROG, then UP / CLEAR.
4.3 Manual and automatic operation
You can toggle between the operating modes AUTO,
ON and OFF using the SET button.
• AUTO : the device connected to the timer is
switched on and off at the times that have been
programmed.
• ON : the device connected to the timer remains on
at all times; the programmes are not executed.
• OFF : the device connected to the timer is turned
off at all times; the programmes are not executed.
4.4 Countdown
• Switch into operating mode ON or OFF .
• To enable or disable the countdown function, first
press PROG and UP / CLEAR at the same time
and then press SET.
• To set the desired countdown length, press UP /
CLEAR and then press CLOCK / OK to confirm.
Operating
Countdown function
mode
When the countdown is complete
(00:00), the connected terminal
OFF
device is switched on and the timer
switch goes into operating mode ON .
When the countdown is complete
(00:00), the connected terminal device
ON
is switched off and the timer switch
goes into operating mode OFF .