Steren MINI DRONE Manual De Instrucciones página 16

IMPORTANT
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference. Because to updates can exist difference.
Consult our website (www.steren.com) to obtain the most actual version of this manual.
CAUTIONS
It is essential that the user follows the recommendations and warnings included in this
manual. Steren is not responsible by material damages or personal injuries caused by to
ignore cautions or by wrong use
• This device should NOT be used by kids under 14 years.
• Children must used this product only under adult supervision.
• Keep an eye always to the drone to avoid colliding with people, animals or objects.
• Don´t touch the propellers while working.
• Be careful with the manipulation of the battery, may be hot.
• Don't use the drone with bad weather (rain, strong wind or electric storm).
• Keep away from high tension cables, trees, buildings or others dangerous areas.
• Avoid strong drops, may cause damages.
• This device cannot be used by people with different abilities, unless they have preparation and
supervision.
• Don't try to open the device, may cause malfunction and the warranty will be avoid.
• If the battery is hot, leave it some minutes to cool before using again.
• Only use the included charging cable.
• Be sure that the battery connector is in the right position before to insert it into the drone. Never force the
connections.
• Don't pull the battery cables; manipulate carefully to avoid damages in the connections.
• If the battery is damaged, you must leave to use it immediately.
• Choose an open area to operate the drone.
• Leave at less 1.5 m of distance between you and the drone at all time.
• Always turn off the control and disconnect the drone cables. If you do not use the drone and control for an
extended period of time, remove the batteries after use.
The operation of this device is subject to the following two conditions: (1) it is possible that this device
may not cause harmful interference and (2) this device must accept any interference, including
interference that may cause undesired operation.
1