Product Functions; Wireless Headphone - Panacom HP-968 Manual Del Usuario

PRODUCT FUNCTIONS

Wireless Headphone

1. Insert the emitter audio cable into the "Audio OUT" socket of the audio
source (see Fig.1) or earphone socket, and turn ON the function switch of
the emitter.
2. Turn on the volume control and power button ON/OFF on receiver, the
indicator will light up. First press the RESET key, and then press the SCAN
key, the sound sent from the emitter will be heard.
Note: If the sound is distorted or too strong, adjust the volume of the sound source
to a lower level, and the reception performance may improve.
Wired PC Headset
Connect the black end of the microphone cable into the audio socket on
the receiver, and insert the other two ends into the microphone and audio
sockets of the PC. (see Fig.2)
Wired Earphone
Insert one end of the audio cable into the audio socket of the receiver (see
Fig.3) and insert the other end into the earphone socket of the audio device,
such as MP3 player, VCD player, DVD player, etc. and then the unit can be
used as a wired earphone.
Turning off the unit
1. When the unit is not used, move the power switch on the emitter to OFF
position to turn it off .
2. Turn the volume control on the receiver to OFF position, it will "click" and
the power indicator of the receiver will light off.
Note: Remove batteries when not using unit for a long time.
Pg. 4