Caring For Your Product - Oster VERSA 170683 Manual Del Usuario

Using the Manual Controls
The Manual Controls include:
High (High speed)
Med (Medium speed)
Low (Low speed)
Pulse
Reverse Blend
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. P ress the ON/OFF power button to turn the product on. The power light
will blink, meaning the product is active and ready to use. The light will stay
on when the motor is running.
2. C hoose a recipe from the recipe book or use one of your own.
3. Put the ingredients into the jar.
4. Secure the lid and the filler cap.
Using the High Speed Selection
1. Verify that the red light is blinking. This indicates
that the blender is turned on.
2. T urn knob to "High" and press knob to start.
3. P ress the knob to cancel the operation at any time.
4. P ress the ON/OFF power button to turn the product off.
Using the Medium Speed Selection
1. Verify that the red light is blinking. This indicates
that the blender is turned on.
2. T urn knob to "Med" and press knob to start.
3. P ress the knob to cancel the program at any time.
4. P ress the ON/OFF power button to turn the product
off.
Using the Low Speed Selection
1. Verify that the red light is blinking. This indicates that the blender is turned
on.
2. T urn knob to "Low" and press knob to start.
3. P ress the knob to cancel the program at any time.
4. P ress the ON/OFF power button to turn the product
off.
NOTE: User may increase or decrease speed selection
without interruption while the blender is operating.
Using the Pulse
1. Verify that the red light is blinking. This indicates that the blender is turned on.
2. Press and release the "Pulse" button.
3. Release the pulse button to stop.
4. Press the ON/OFF power button to turn the product off.
BLSTVB-103_104_13ESM1.indd 8-9
8
Use pulse button to crush ice or chop food.
Using the Reverse Blend Button (Use with Blender Jar Only)
1. Verify that the red light is blinking. This indicates that the blender is turned on.
2. Turn knob to "Low", "Med", or "High".
3. Press and hold the Reverse Blend Button.
4. Release to stop.
5. Press the ON/OFF power button to turn the product off.
Use Reverse Blend Button to draw food towards the blade as needed. This button
can also be used during normal Low, Medium, or High blending.

Caring for Your Product

After Use
1. P ress the OFF button and unplug blender. Lift the jar straight up from the
base, remove the lid and empty the jar.
2. I f necessary, use a rubber spatula to scrape foods away from the sides of the
jar.
Cleaning
The Blade is SHARP! CAREFULLY release the blade from the bottom of the jar
by turning the threaded jar bottom counterclockwise. The jar lid, filler cap and
blade are dishwasher safe. Use the top rack of the dishwasher for the jar lid, filler
cap, and blade. Place sealing ring into bottom basket of dishwasher.
You can also wash the parts in warm, soapy water.
Rinse well and dry. Wipe the base with a soft, damp
cloth to clean. Never submerge the blender base in a
liquid.
Check the parts as you put them back together.
TIP: Run blender with soapy water for 20-30 seconds
for cleaning without disassembly. Follow with clean
water rinse.
Storing
Reassemble the blender for storage. Leave the lid open a gap so no odors are
retained.
WARNING: Never put the jar, or any other parts, in a microwave
oven. Never store foods or drinks in the jar.
Servicing
If repairs are needed, send your appliance only to an authorized OSTER
Appliance Service Center. Replacement parts are available on www.oster.com or
call 1-800-334-0759.
®
9
12/13/13 9:18 AM