Tips For Taking Pictures In The Water - Panasonic Lumix DMW-MCFT3 Instrucciones De Funcionamiento

Tips for Taking Pictures in the Water

When the image is too bluish in the water
1
Select [White Balance] from the [Rec] Mode menu.
2
Press [DISP.] to display [WB Adjust.].
3
Press [AF-L ]/[ ] to adjust the white balance.
4
Press [MENU/SET] to finish.
≥
You can also press the shutter button halfway to finish.
Select the best picture
Set the flash to [
Using the Auto Bracket Function (For models with an Auto Bracket Function)
≥
Each time the shutter button is pressed, 3 pictures with different exposures are
automatically recorded. You can select the desired picture from the 3 pictures.
Use Burst Mode
≥
When taking pictures of a fast-moving subject (a fish etc.), you can select your
favourite picture after taking the pictures using Burst Mode.
∫ Note
≥
WB fine adjustment (Underwater Mode) is also supported when recording motion
pictures.
The white balance can be adjusted according to water depth or preference.
≥
For more information, read the operating instructions of the digital camera.
].
19
VQT3M30