Teka LSI5 Guía De Uso página 9

Mount the furniture door to the
l
front of the washer using the
hinges. Place
under the hinges (I) and then
fix in position with screw (H).
We suggest mounting the
furniture door so that it opens
towards the left, which is the
same direction as the porthole
door. This will leave more
space when you are loading
washing into the appliance.
Place the washer into the
l
furniture (ckeck the picture).
Place the furniture plinth (its
heighty will depend on the
height of the washer).
The 4 adjustable feet allow the
l
height of the washer to be
adjusted from 820 mm to a
maximum of 840 mm. To adjust
the height, you should remove
the nuts fitted to each foot and
replace these with the 5 mm
nuts supplied. Raise the feet to
your desired height and then
fully tighten the lock nut to the
base of the washer.
the spacers
9
I
H