Surtek 111001 Manual De Usuario página 26

E N G L I S H
• When the Meter working at an effective
voltage over 60V in DC or 42V rms in AC,
special care should be taken for there is danger
of electric shock.
• Use the proper terminals, function, and range
for your measurements.
• Do not use or store the Meter in an
environment of high temperature, humidity,
explosive, inflammable and strong magnetic
field. The performance of the Meter may
deteriorate after dampened.
• When using the test leads, keep your fingers
behind the finger guards.
• Disconnect circuit power and discharge
all high-voltage capacitors before testing
resistance, continuity, diodes and current.
• Before measuring current, check the Meter's
fuses and turn off power to the circuit before
connecting the Meter to the circuit.
• Replace the battery as soon as the battery
indicator appears. With a low battery, the
Meter might produce false readings that can
lead to electric shock and personal injury.
26
• Remove test leads and temperature probe
from the Meter and turn the Meter power off
before opening the Meter case.
• When servicing the Meter, use only the
same model number or identical electrical
specifications replacement parts.
• The internal circuit of the Meter shall not be
altered at will to avoid damage of the Meter
and any accident.
• Soft cloth and mild detergent should be
used to clean the surface of the Meter when
servicing. No abrasive and solvent should be
used to prevent the surface of the Meter from
corrosion, damage and accident.
• The Meter is suitable for indoor use.
• Turn the Meter off when it is not in use and
take out the battery when not using for a
long time.
• Constantly check the battery as it may leak
when it has been using for some time, replace
the battery as soon as leaking appears. A
leaking battery will damage the Meter.