Piezas De Desgaste; Welding With Aluminium Wire - ESAB Origo M08 Instrucciones De Uso

Feed L302

Piezas de desgaste

Item Ordering no.
HM1 0455 889 001* Insert tube
0455 894 001* Insert tube
HM2 0455 886 001* Outlet nozzle
0455 885 001* Outlet nozzle
HM3 0455 898 001 Screw
0215 201 202 O-ring
HM4 0455 881 001 Cover plate
HM5 Screw
HM6 0193 104 002 Washer
HM7 0367 556 001 Feed roller
0367 556 002 Feed roller
0367 556 003 Feed roller
0367 556 004 Feed roller
HM8 0466 074 001 Insert tube
HM9 0455 906 001 Spacer sleeve
HM10 0455 907 001 Pressure roller
HM11 Nut
HM12 0469 835 001 Pressure arm
HM13 0456 088 001 Shaft
HM14 0455 896 001 Spring
HM15 Nut
HM16 0458 748 002 Insulating washer
HM17 0458 748 001 Insulating bushing
HM18 0156 602 001 Inlet nozzle
0332 318 001 Inlet nozzle
HM19 0191 496 114 Woodruff wedge
* Insert tube 0455 889 001 and outlet nozzle 0455 886 001 must be used together.
Insert tube 0455 894 001 and outlet nozzle 0455 885 001 must be used together.
PARTS SET
Item Ordering no.
HM100 0367 529 001 Pressure arm compl.

Welding with aluminium wire

In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire MUST be
used, It is recommended to use 3 m long welding gun for aluminium wire, equipped with appropriate
wear parts.
bm38whm1
Denomination
For Fe, Ss & cored wire
For Al wire
For Fe, Ss & cored wire
For Al wire
(M5x12)
M4x12
Ø16/5x1
For Fe, Ss & cored wire, Ø 0.6 - 0.8 mm, V groove
For Fe, Ss & cored wire, Ø 0.8 - 1.0 mm, V groove
For Fe, SS & cored wire Ø 1.0 - 1.2 mm, V groove
For Al wire, Ø 1.0 - 1.2 mm, U groove
Included in item HM100
Flat, Included in item HM100
M8, Included in item HM100
Included in item HM100
Included in item HM100
M10
For Fe, Ss, Al & Cored wire, Ø 2 mm plastic for 0.6-1.6 mm
For Fe, Ss & Cored wire, Ø 2.4 mm steel for 1.2-2.0 mm
Denomination
Includes item HM9, HM10, HM11, HM12 and HM13
Notes
Notes
- 20 -
© ESAB AB 2004