General Power Tool Safety Warnings - Makita DDF446 Manual De Instrucciones

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Switch trigger
8. Lamp
9. Reversing switch lever
SPECIFICATIONS
Model
Capacities
Wood screw
Machine screw
High (2)
No load speed
-1
(min )
Overall length
Net weight
Battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
Explanation of general view
10. Speed change lever
11. Adjusting ring
12. Graduation
13. Arrow
14. Sleeve
15. Groove
16. Hook
17. Screw
18. Bit holder
Steel
Wood
Low (1)
1.5 kg
BL1415/
BL1415N
DDF446
13 mm
38 mm
6 mm x 75 mm
M6
0 - 1,500
0 - 400
192 mm
1.7 kg
BL1430/BL1430B/
BL1440/BL1450/
BL1460B
D.C. 14.4 V
metal parts of the power tool "live" and could give the
ENE034-1
operator an electric shock.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
GEA010-1
power tool "live" and could give the operator an
electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
GEB088-1
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
19. Bit
20. Limit mark
21. Rear cover
22. Recessed part
23. Spring
24. Arm
25. Carbon brush cap
26. Hole
27. Carbon brush cap
DDF456
13 mm
38 mm
10 mm x 89 mm
M6
0 - 1,500
0 - 400
192 mm
1.5 kg
BL1830/BL1830B/
BL1815/ BL1815N/ BL1840/BL1840B/
BL1820/ BL1820B BL1850/BL1850B/
D.C. 18 V
1.7 kg
BL1860B
5