Connecting The Unit To A Smartphone Via Wi-Fi (Second And Subsequent Times) - Tascam DR-44WL Manual Del Usuario

On your iOS device, select "Settings" w "Wi-Fi".
4.
When you turn on Wi-Fi on your iOS device, a
5.
Wi-Fi device SSID list appears. Select the SSID
shown on the display of the unit.
A password input screen appears on the iOS
6.
device. Enter the encryption key shown on the
display of the unit.
A Wi-Fi connection between the unit and
7.
your smartphone is established and the Wi-Fi
indicator is lit.
If using an Android device
Press the Wi-Fi button to make the Wi-Fi
1.
indicator blink.
A pop-up message appears on the display.
You will be making a connection to a new
2.
smartphone, so press the ENTER/MARK
button.
"SSID" and "Encryption key" appear on the
3.
display, and then the unit enters the WPS mode
automatically.
10
TASCAM DR-44WL
NOTE
The WPS mode is the standard for easy
connection between Wi-Fi devices. This unit
employs the PIN code system for iOS devices.
On your Android device, select "Settings" w
4.
"Wi-Fi".
When you turn on Wi-Fi on your Android device,
5.
a Wi-Fi device SSID list appears. Select the SSID
shown on the display of the unit.
A password input screen appears on the
6.
Android device. Enter the encryption key
shown on the display of the unit.
A Wi-Fi connection between the unit and
7.
your smartphone is established and the Wi-Fi
indicator is lit.
NOTE
The operation for Android devices explained
above is for smartphones. For details, see
your smartphone's operation manual.
Connecting the unit to a smart-
phone via Wi-Fi (second and
subsequent times)
Once you have connected the unit to your smart-
phone, you can connect them again in the future
simply by selecting SSID.
If using an iOS device
Press the Wi-Fi button of the unit to make the
1.
Wi-Fi indicator blink.
A pop-up message appears on the display.
You will be making a connection to a previously
2.
connected smartphone, so press the 8/HOME
button.
The pop-up message on the display disappears
3.
and the unit waits for a connection with a
smartphone.
On your iOS device, select "Settings" w "Wi-Fi".
4.
When you turn on Wi-Fi on your iOS device, a
5.
Wi-Fi device SSID list appears. Select the SSID
shown on the display of the unit.
A Wi-Fi connection between the unit and
6.
your smartphone is established and the Wi-Fi
indicator is lit.
If using an Android device
Press the Wi-Fi button of the unit to make the
1.
Wi-Fi indicator blink.
A pop-up message appears on the display.
You will be making a connection to a previously
2.
connected smartphone, so press the 8/HOME
button.
The pop-up message on the display disappears
3.
and the unit waits for a connection with a
smartphone.
On your Android device, select "Settings" w
4.
"Wi-Fi" .
When you turn on Wi-Fi on your Android device,
5.
a Wi-Fi device SSID list appears. Select the SSID
shown on the display of the unit.
A Wi-Fi connection between the unit and
6.
your smartphone is established and the Wi-Fi
indicator is lit.
NOTE
The operation for Android devices above is
for smartphones. For details, see your smart-
phone's operation manual.