Panasonic EY7549 Manual De Instrucciones página 18

VI. MAINTENANCE
• Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben-
zine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain
and allow to dry as soon as possible. Carefully remove any dust or iron filings that
collect inside the tool. If you experience any problems operating the tool, consult
with a repair shop.
VII. ACCESSORIES
Use only bits suitable for size of drill's chuck.
Use Panasonic original Optional Keyless drill chuck (EY9X003E) and Quick change
chuck(EY9HX111E) for maximum performance.
VIII. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Screw Wood screw
driving
Self-drilling screw Impact mode
Bolt fastening
Drill Steel
Wood
WARRANTY SUPPLEMENT
The breakdown and damage caused by usage consistent for a long time (e.g.: factory
work on the assembly line, etc.) is out of warranty.
Impact mode
Drill driver High mode
Drill driver Low mode
Drill driver High mode
Impact mode
Drill driver High mode
Drill driver Low mode
Drill driver High mode
Drill driver Low mode
- 18 -
9 mm (3/8")
4.2 mm (1/8")
6.8 mm (1/4")
6 mm (1/4")
6 mm (1/4")
Standard bolt: M14
High tensile bolt: M12
10 mm (3/8")
13 mm (1/2")
21 mm (7/8")
35 mm (1 - 3/8")