Technical Specifications - HyperX Cloud II Manual De Usario

Technical Specifications:

Headset
Transducer type: Dynamic 53mm with Neodynium Magnets
•
Operating principle: Closed
•
Frequency response: 15Hz-25KHz (earphones)
•
Nominal impedance: 60 ohm per system
•
Nominal SPL: 98+/-3dB
•
T.H.D: < 2%
•
Power handling capacity: 150mW
•
Sound coupling to the ear: Circumaural
•
Ambient noise attenuation: approx.20 dBA
•
Headband pressure: 5 N
•
Weight with microphone and cable: 320g
•
Cable length and type: 1m + 2m extension
•
Connection: Mini stereo jack plug (3.5MM)
•
Microphone
Microphone Transducer type: Condenser (back electret)
•
Operating principle: Pressure gradient
•
Polar Pattern: Cardioid
•
Power supply: AB powering
•
Supply voltage: 2V
•
Current consumption: Max 0.5 mA
•
Nominal impedance: ≤2.2 k ohm +/- 30%
•
Open circuit voltage at f = 1 kHz 20 mV / Pa
•
Frequency response: 50 - 18,000 Hz (microphone)
•
T.H.D: 2% at f = 1 kHz
•
Max. SPL: 105dB SPL (THD ≤ 1.0% at 1KHz)
•
Microphone output: -39+/-3dB
•
Dimensions: 6*5mm
•
Length mic boom: 150MM(include gooseneck)
•
Capsule diameter: 6mm
•
Document No. 480KHX-HSCP001.A01 HyperX Cloud II Headset Page 3 of 11