Safety Instructions - Denon Professional DN-500BD MKII Guia Del Usuario

User Guide (English)
Introduction
Box Contents
DN-500BD MKII
Power Cable
Remote Control

Safety Instructions

Please also see the included Safety & Warranty Manual for more information.
Before turning the
power on:
Proper ventilation:
About condensation:
Cautions on using
mobile phones:
Moving the unit:
About care:
Rackmount warnings:
(required rack specifications
for mounting the unit in a
rack)
Rack installation:
Rack Ears & Screws
User Guide
Safety & Warranty Manual
Make sure all connections are secure and correct and that there are no
problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is powered off.
When the unit will not be used for long periods of time, disconnect the power
cable from the power outlet.
If the unit is left in a room which is not properly ventilated or is full of smoke
from cigarettes, dust, etc. for long periods of time, the surface of the optical
pickup may get dirty, causing incorrect operation.
If there is a major difference in temperature between the inside of the unit and the
surroundings, condensation may form inside the unit, causing the unit not to
operate properly. If this happens, let the unit sit for an hour or two while powered
off, and wait until there is little difference in temperature before using the unit.
Using a mobile phone near this unit may cause noise. If this occurs, move the
mobile phone away from this unit when it is in use.
Before moving the unit, turn off its power and disconnect the power cable from
the power outlet. Next, disconnect its connection cables from other devices
before moving it.
Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic solvents to
clean the unit. These materials can cause material changes and discoloration.
EIA standard 19-inch (483 mm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that can
support this device
This product will work normally when the player unit is
mounted within 10° off the vertical plane at the front
panel. If the unit is tilted excessively, the disc may not
load or unload properly. (See image.)
Support
For the latest information about this product (system
requirements, compatibility information, etc.) and
product registration, visit denonpro.com.
Maximum 10°
Unit
3