Oster FPSTHMAMR Serie Manual De Instrucciones página 16

MIXING
1. Add in the rest of the ingredients into the mixing bowl.
NOTE: To avoid splatters start unit on lowest speed and slowly increase to the desired
speed setting.
2. Slowly guide mixer around sides and through center of bowl, going in the same
direction. Be careful not to overbeat the mixture. Overbeating tends to make some
mixtures tough.
NOTE: Whenever scraping of the bowl is required, stop the mixer and scrape sides
and bottom of bowl with a rubber spatula as needed. Turn speed control to "0 (OFF)"
while adding ingredients. Be sure to position beaters over mixing bowl so any drippings
will fall back into mixing bowl.
3. When mixing is complete, set speed control to "1" and raise beaters slowly from batter
to clean off clinging food. Be sure to turn unit to "0 (OFF)" before raising beaters
completely out of mixing bowl.
EJECTING BEATERS
CAUTION: Turn off and unplug the appliance before ejecting any accessories. Allow
beaters to cool before removing from appliance.
Be sure speed control is at the "0 (OFF)" position and cord is removed from electrical
outlet. Press the Beater Eject Button and accessories will release.
HOW TO ADJUST THE SPEED
1. Move the speed selector from 1 to 5 and to turn off set to "0 (OFF)".
2. To engage a higher speed immediately press and hold the Turbo Button. The speed
will go to 5 until released and will return to orginal setting.
NOTE: This feature is intended to be used for short bursts. For long mixing use select
speed 5.
E n g li s h -6