Troubleshooting - Oster FPSTHMAMR Serie Manual De Instrucciones

5. Do not use any abrasive cleaner or material to clean any part of the hand mixer, any
part of the hand mixer or storage case as it can scratch the product.
REPLACING HEATER VENT FILTER
The Heater Vent Filter should be replaced when it's torn or
damaged. This part is available for purchase at an Authorized
Oster Service Center.
®
MAINTENANCE
This appliance has no user serviceable parts. Any servicing beyond that described in
the Cleaning and the Replacing Heater Vent Filter sections should be performed by an
Authorized Service Representative only.
Possible difficulties include but are not limited to:
PROBLEM POSSIBLE CAUSE
Hand mixer will not Motor is over-heated.
start.
Beaters won't insert Accessories aren't lined
into mixer. up with unit.
Can't remove beaters. Beater Eject Button not
fully pressed.
HeatSoft™ continues HeatSoft™ button not fully
to operate. pressed.
Heater fan cover Locking tab may be
cannot be reinstalled. broken.
TROUBLES HO OT IN G
E n gl is h - 8
Fig. 5
WHAT TO DO
Unplug from power outlet and wait 10 minutes
before next use.
Rotate beaters slightly clockwise until they snap
into the unit.
Unplug the mixer then press down the Beater
Eject Button and gently pull accessories out.
Press the HeatSoft™ button once to turn off or
unplug from the power outlet.
Call customer care for replacement part.
Heater Vent
Filter