(2) apply composite to Componeer
Apply composite with a suitable instrument (MB5 modelling instrument) to the contact side of the COM-
PONEER and shape to the margins. The composite is also applied to the tooth with concave shapes to pre-
vent air inclusions.
(3) placing Componeer
Place COMPONEER on the tooth. Then move the COMPONEER to the final position carefully and with gentle
but constant pressure with the placer.
(4) aligning Componeer
We recommend starting with the two central incisors when restoring all the anteriors.
note
Optimum wetting of the bonded surfaces can be achieved by using SYNERGY D6 Connect, in the colours White
Opalescent and Universal, as a luting composite.
18