Sveon SNT1020 Manual De Usuario página 34

5. If the connection is propperly done, the Modem o router will assign the setup data:
If your Modem or router is "N", this icon appears
Note: IP data IP 192.168.1.100 may change depending on the setup and the Modem/Router model.
9.3 AP-Mode Connection (Ad Hoc)
The AP-Mode function allows you to use your SNT1020 adaptor as a Router o Modem and setup a wireless network using
two adaptors.
AP-Mode connection under Windows XP
1. Right click over the following icon located in the Windows bar and select the option "Switch to AP Mode".
2. This window appears:
SNT1015 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English 34