Sveon SNT1020 Manual De Usuario página 38

10.1 Network
1. SSID: Wireless network name
2. Channel: The channel you are using
3.: Modem or router standards:
11Mbps
54/108Mbps
150/300Mbps
4. Protection: Displays if the network is protected with password (appears a key icon).
5. Signal: Shows the network signal power.
Select the network you want to connect and click on the arrow "Pres here" to display the following information:
1. SSID / Network name
2. Router Mac address
3. Red encryptation
4. Channel used for your router/modem. to send the signal
5. Connection mode
6. Beacon Interval*
*Beacon Interval. This value may help you in the asociation problems. If the connection fails when the signal power is
good, try to adjust this value to 50 in your Modem or router (check also the user guide of your Modem or router).
Once the connection is finished, the connection data will appear:
1. Name and MAC address of your wireless router/modem.
2. Network signal power
3. Channel
4. Type of encryption password of your router/modem.
5. IP address of your router/modem.
SNT1020 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English 38