Ravpower RP-SH008 Guia Del Usuario página 5

Rotate the ball joint to obtain your best viewing angle
Powering the Wireless Charger
1. Connect the micro USB cable into the charging port.
2. Insert the USB connector into a car charger.
Note: The car charger is not included in the RP-SH008.
58.6 - 88.6mm / 2.3 - 3.5 inch
Position your phone so that back-center aligns with Fast Clamping Button.
The arms will automatically close against your device upon a slight
push against the trigger.
Note:
· Line up the center of phone with the charging coils to achieve e cient charging.
· Phones with cases more than 0.2 inch / 0.5 cm thick will not be detected.
Remove before charging.
Charging will start automatically with a right connection and the charging
indicators will light up accordingly.
Charging Indicators
Turns blue for 10 seconds,
then turns o
Turns on solid blue
Blue indicator turns o
Flashes red
Working Status
Standby
Charging a compatible device
Device fully charged
FOD (Foreign Object Damage)
alarm
03/04