How To Connect; Troubleshooting - Audio-Technica ATH-ANC50iS Manual De Usuario

How to connect

Connector
plug
Detachable 1.2 m (3.9')
headphone cable for smartphone
3.5 mm (1/8")
stereo dual jack
3.5 mm (1/8")
Airline seat
stereo mini jack
1 Connect the connector plug of the included cable to the input jack of the
headphones.
* Before using the detachable cable, identify the "Connector plug" and
the "Input plug" .
2 Minimize the volume of each sound device, then connect the "Input
plug" to the headphones terminal.
* Use included airplane adapter to connect to typical airline audio
systems.
3 Move the power switch on the product to the ON position, and fit the
earpads over your ears with the side marked "L " over your left ear and
"R" over your right ear, adjusting the headband length by sliding the
adjustable slider.
* The power indicator should light in red when noise-cancelling function
is activated.
4 After you have finished using your headphones, be certain to move the
power switch to the OFF position, and detach the 1.2 m (3.9') headphone
cable from the headphones and the audio device or smartphone.
• For noise-cancelling without audio, there is no need to connect the
headphone cable.
• The product features the play-through function to operate as stereo
headphones and play music from a portable device even if the product
runs out of battery (play-through function).
• Playback sound can be easily heard outside to ensure the quality
performance of the product. On public transport systems or in other
public places, keep the volume low so as not to disturb other people.
Using the headphone cable for smartphones
Control button
Microphone
Smartphone Portable audio
player etc.
Input plug
Airline
adapter
Playback/pause for Press the control
music/movies button once.
Answering/ending
calls
* Some smartphones do not support
playback and pause functionality for
music/movie files.
* Audio-Technica does not provide
support for how to use smartphones.
Cleaning
Get into the habit of regularly cleaning your headphones to ensure that they
will last for a long time. Do not use alcohol, paint thinners or other solvents
for cleaning purposes.
• Use a dry cloth to clean the headphones and the in-line controller.
• After using the included cable, clean it with a dry cloth if sweat or dirt is
present. Failure to clean the cable may cause it to deteriorate and harden
over time, resulting in malfunction.
• Wipe your plugs on included cables with a dry cloth if dirty. Using the
plug without cleaning it can cause sound skipping or distortion.
• To clean the earpads and headband, wipe with a dry cloth. Earpads and
headband may fade if sweat or water dries on them. If the earpads and
headband get wet, we recommend wiping them with a dry cloth and
allowing them to dry in the shade.
• For long-time storage, keep the product in a well-ventilated place free
from high temperatures and humidity.
• Earpads will deteriorate over time due to use and storage. Replace when
necessary. For information about replacing earpads or other parts, or for
information about other serviceable parts, contact your Audio-Technica
dealer.

Troubleshooting

Problem
Ambient noise is not reduced.
The product produces rumbling
noise.
Howling sound is caused.
Sound has become distorted.
Sound buzzes and flutters.
Solution
• Make sure the indicator lamp lights
in red. Change the battery if the
indicator lamp does not light when
the power switch is on.
• Adjust headphones' position.
Headphones may be incorrectly
positioned on ears.
• Ambient noise may be out of
synchronization with noise-cancelling
frequency.
• Connecting to some devices such as
portable audio players equipped with
a digital amplifier can cause noise.
• Using the product in a car, bus, etc.
may cause noise depending on the
road condition.
• Adjust headphones' position.
Headphones may be incorrectly
positioned on ears.
• Turn down the volume of audio/video
equipment.
• Change the battery in the product.
• The product may pick up noise from
mobile phones or equipment related
to computers nearby. Keep the noise-
causing equipment away from the
product.
English
5