Cherubini TDS GOLD Serie Manual De Instrucciones página 29

This kind of Wind-sensor must be wired to the control unit on the indicated terminals,
without respecting the polarity. Exceeding the set level the control unit will automatically
perform the command associated to the UP button of the remote control. So ensure that
the rotation direction corresponds correctly to the buttons of the remote control. If not
it's absolutely necessary to set the rotation direction. The "Wind-alarm" time is 8 minutes
during which the control unit will not accept any command. During the wind-alarm the
red led inside the control unit is on.
In factory set on: 25 km/h
The control unit will keep the wind-speed setting even after complete memory
clearing!!
B + C
WIND SENSOR WINDTEC-SC
WINDTEC SC - Ref. A520010
WIND-SPEED SETTING
(WINDTEC-SC)
B
29
A
25 km/h
B
15 km/h
C
35 km/h
2 sec
GB